Description
LVO-MCL-15E-P is a one-piece quick clamping shaft collar with clamping lever with a 0.9375″ bore, 45mm OD, and 15mm width. It is made from MCL-15E-P and LF45-CL-M6:18-ZS. MCL-15E-P is an international series shaft collar that has an inch bore, metric hardware, and metric dimensions. The clamp style design does not mar the shaft, is easy to remove, and is indefinitely adjustable. The threaded stud on the lever is used in place of standard collar hardware. When combined, the two parts create a shaft collar that requires no tools to install, remove, or reposition and is ideally suited for packaging, printing, and other applications where frequent setup changes and adjustments are needed. Once the lever is installed in the shaft collar, users simply turn the lever until they meet their desired torque. The adjustable lever can be reposition by the user without the loss of holding power by lifting the handle and twisting it 40° to lock it in a new position. This allows for use in space constrained environments where 360° rotation is not possible to fully seat the lever. MCL-15E-P is made from acetal plastic. LF45-CL-M6:18-ZS has a zinc plated steel handle and stainless steel threaded stud. This material combination allows for a lightweight quick clamping and release component with high corrosion resistance that is suitable for light duty industrial applications. The lever is orange for safety and ease of identification.
DIMENSION | |||
---|---|---|---|
Bore (B) | 0.9375 in | Bore Tolerance | +0.0020 in / +0.0005 in |
Outer Diameter (OD) | 45 mm | Center to Lever Top H1 | 38.8 mm |
Width (W) | 15 mm | Width Tolerance | +0.076 mm / -0.254 mm |
Lever Length L1 | 45 mm | Lever Height H2 | 38.5 mm |
Hub Diameter DH | 13 mm | Sleeve Length L2 | 18 mm |
Recommended Shaft Tolerance | +0.0000 in / -0.0005 in | ||
FASTENING HARDWARE | |||
Thread TH | M6 | Hex Wrench Size | 5.0 mm |
Seating Torque | 2.8 Nm | Screw Location (R) | 17.50 mm |
Number of Screws | 1 ea |