WCLK-32-SS

Category:

Description

WCLK-32-SS is a one-piece shaft collar with a 2.000″ bore, 1/2″ keyway, 3″ OD, and 1 15/32″ width. The clamp style design does not mar the shaft, is easy to remove, and is indefinitely adjustable. It is commonly used for guiding, spacing, stopping, mounting, and component alignment. Equipment manufacturers benefit from the tightly controlled face to bore perpendicularity (TIR of ≤ .002″). Perpendicularity is critical for alignment when the shaft collar is used as a load bearing face, mechanical stop, or for mounting components such as gears or bearings. This double wide shaft collar has 25% higher axial holding power than a round bore of equivalent size. It can also be used as a short rigid coupling for applications where a traditional rigid coupling is too long. Forged screws test beyond DIN 912 12.9 standards to ensure maximum holding power. Stainless steel hardware undergoes a proprietary surface treatment process to prevent galling.

DIMENSIONS
Bore (B)  2.0000 in Bore Tolerance  +0.0020 in / +0.0005 in
Keyway (K) 1/2 in Width (W) 1 15/32 in
Outer Diameter (OD) 3 in Width Tolerance +0.003 in / -0.010 in
Clearance Diameter (C) MAX  3.360 in Recommended Shaft Tolerance  +0.0000 in / -0.0005 in
FASTENING HARDWARE
Forged Clamp Screw  5/16-24 Screw Material 18-8 300 Series Stainless Steel
Hex Wrench Size  1/4 in Screw Finish  Bright
Seating Torque  190 lb-in Screw Location (R) 1.250 in
Number of Screws 2 ea