Description
SPH-48-SS is a two-piece heavy duty shaft collar with a 3.0000″ bore, 5″ OD, and 1.375″ width. The clamp style design does not mar the shaft, is easy to remove, and is indefinitely adjustable. It is commonly used for guiding, spacing, stopping, mounting, and component alignment. Equipment manufacturers benefit from the tightly controlled face to bore perpendicularity (TIR of ≤ .002″). Perpendicularity is critical for alignment when the shaft collar is used as a load bearing face, mechanical stop, or for mounting components such as gears or bearings. Halves are mated throughout the manufacturing process for proper fit and alignment. Forged screws test beyond ANSI standards to ensure maximum holding power. Stainless steel hardware undergoes a proprietary surface treatment process to prevent galling.
| DIMENSION | |||
|---|---|---|---|
| Bore (B) | 3.0000 in | Bore Tolerance | +0.004 in / -0.000 in |
| Outer Diameter (OD) | 5 in | Clearance Diameter (C) MAX | 5.397 in |
| Width (W) | 1.375 in | Width Tolerance | +0.003 in / -0.010 in |
| Recommended Gap | 0.188 in | Recommended Shaft Tolerance | +0.0000 in / -0.0010 in |
| FASTENING HARDWARE | |||
| Forged Clamp Screw | 1/2-20 x 1 3/4 | Screw Material | 18-8 300 Series Stainless Steel |
| Hex Wrench Size | 3/8 in | Screw Finish | Bright |
| Seating Torque | 800 lb-in | Screw Location (R) | 2.063 in |
| Number of Screws | 2 ea | ||
